<< Click to Display Table of Contents >> Navigation:  User manual NorCloud > Sensor > Setting up your Instrument > SMS commands

A set of SMS commands can be sent from any Accepted SMS numbers to any Instruments connected to NorCloud via a cellular modem with a SIM card installed.

The implemented commands are:

1.restart - Restart sensor

2.status - Will send a status message of sensor

3.ok - Respond with a smiley

4.startmeasurement - Start measurement if not started, responds with state

5.stopmeasurement - Stop measurement, responds with state

6.state - Returns state of measurement (Running, Saved, Idle)

To use these commands you need to know the instrument cellular number.